Care & Maintenance Instructions

NuVuWall and EraseWall

Important care before using writing surface:

Clean the surface thoroughly with a non-abrasive household cleaner, such as a glass cleaner.  Once cleaned, completely rinse the surface with clean water.  The water rinse will remove any residue left behind by the cleaning agent.  Dry with a clean soft cloth.

Important maintenance for MarkaWall surfaces:

            1)         Use the MarkaWall dry erase markers for optimal results.   

2)         Remove dry-erase markings with the MarkaWall felt erasers for longer lasting surface effectiveness.  Press firmly when erasing, using a circular motion.  Change erasers as they become dirty.  Dirty erasers will leave ink residue on the surface. 

If using the nu•vu•wall surface, be sure to use the MarkaWall nylon bristle eraser for best results.  Normal felt erasers do not reach deep enough into the bi-directional lenticular surface. 

3)         High gloss dry-erase surfaces offer excellent dry-erasability, as the gloss level decreases so may the total effectiveness of dry erasing.  If using the MarkaWall 2 low odor dry-erase markers, additional cleaning with water and a soft cloth may be required.  If ghosting occurs, wipe the board with a soft cloth dampened with water.  Ghosting is the term used to describe any faint remnant of marker left on the board after dry erasing.  The use of MarkaWall towelettes will also remove the ghosting from the dry-erase surface. 

4)         For daily cleaning, rinse the surface with water.  This may be done with a soft cloth or sponge.  Dry the surface with a soft cloth prior to writing. 

5)         If washing the material with a soft cloth and water will not remove marks,    use the             MarkaWall dry erase cleaner or MarkaWall towelettes.  Once the material is clean, rinse the surface with water and dry with a soft cloth. 

6)         For stubborn stains, you can use a paint/stain remover such as Goof Off®.  Apply to a soft cloth, blot and/or rub gently over the stained area.  After the stain has been removed, rinse with clean water and dry with a soft cloth.  Follow the paint/stain remover manufacturer’s precautions before using. 

CAUTION:

            •           Do not use ballpoint pens or other sharp pointed instruments on the MarkaWall surface.

            •           Do not use abrasive cleaners on the MarkaWall.

            •           Permanent marker may be removed with MarkaWall dry erase cleaner or by writing     over the markings with a dry erase marker.